Tuesday, 1 December 2009
Wednesday, 11 November 2009
Flat-Strap FS35 Pivots for Glass
The above door uses a 30mm x 30mm glazing channel and is fitted into a set plaster board wall without door jambs, architraves or other casework trim.
Flat-Strap FS35 pivots for glass
Flat-Strap FS35 pivots are ideal for framed and frameless glass applications. These small concealed pivots sets are a low cost, low profile product, ideal for internal domestic glazing applications.
Flat-Strap pivots can be fitted into a 30mm x 30mm glazing channel. There are lots of interesting applications for museum display cases, shop-fitting work, illuminated signs and lighting using clear, transluscent, tinted or mirrored glass.
The initial prototypes have been assembled in the Canberra workshop of the Flat-Strap designer Howard Styles who believes that all adventures into experimental architectural detailing should also include the fabrication of prototypes constructed by the designer to iron out all the wrinkles as a neccesary part of the creative process.
Thursday, 5 February 2009
Angle-Shoe Pivot Contact Data
Angle-Shoe Pivots Canberra Australia
Website www.angleshoe.com
Email hstyles@bigpond.net.au
Telephone 61 2 6232 6455
Facsimile 61 2 6232 6456
Wednesday, 4 February 2009
Angle-Shoe Technical Data
Technical Data Angle-Shoe AS35 concealed pivot sets.
Applications Closets, wardrobes, service closets, hatches, access panels.
For 35mm (1 3/8") door panels to 2400mm (8' 0")
Testing 300.000 cycles on a door of 50Kg (100 pounds)
Advantages Low cost easy to fit pivot sets.
Simple hand tool installation.
Limited trade skills required.
No door frames (door jambs are not required).
No architraves or other casework trim.
No protruding hinge knuckles.
Materials Plates & Angles - 6063 aluminium T6 temper
Alum. finish - Etch prime (grey paint)
Bushes - Polyamide 6 lubricated during assembly
Pivot Pin - Steel (zinc passivated) brass available on request
Screws - Steel 4.5mm dia. CS zinc plated
Boxed Set Two non-handed pivot hinges (for one door leaf)
Fixing screws & metric fitting instructions
Notes Accurate plumb gypsum plasterboard work must be specified.
Pivot doors reduce the clear opening width.
Pivot doors, flush in walls, only open about 160°.
Always draw the swing of the door to check the arrangement.
The pivot stile of the door swings into the closet about 53mm (2").
Subscribe to:
Posts (Atom)
